Evaluation of the environmental impact assessment (EIA) of Chinese EIA in Myanmar: Myitsone Dam,the Lappadaung Copper Mine and the Sino-Myanmar oil and gas pipelines

The economic relationship between China and Myanmar is regarded as a win–win cooperation. However, Chinese investments, especially in extractive and natural resource sectors, are associated with a number of unwanted environmental consequences. Moreover, the environmental impact assessment (EIA) quality of Chinese enterprises has often been criticized. EIA identifies adverse impacts to the environment through evidence-based decision making. On this basis, this paper provides an evaluation of Chinese EIA performance within the natural resources sector through a structured review of 15 environmental impact statements (EISs). This research also evaluates the EISs of the three largest and most controversial projects, the Myitsone Hydropower Dam, Lappadaung Copper Mine and Sino-Myanmar oil and gas pipelines. The findings reveal several omissions, inadequacies and deficiencies in all the projects with a significant number of EISs falling short of satisfactory quality. Through the analysis, the paper summarizes the factors affecting the EIA performance and proposes feasible recommendations to improve EIA practices in Chinese development projects in Myanmar.     

瓦斯抽采集成旁通阀二位放水器研制

针对井下瓦斯抽采中原放水器配气阀安装不规范、双截止阀使用繁琐、工人劳动强度大等现状,研制了具有集成调控装置的放水器,能够实现一个阀门控制所有气路和水路,自主放水和负压排水,从源头上杜绝了瓦斯喷孔和水流溢出等情况,大大降低了职工的劳动强度,实现了井下抽采系统安全可靠运行。     

无烟煤制工业燃气项目原料煤价与经济性的关系分析

针对我国建材行业传统使用的常压固定床煤气发生炉及化肥行业固定床间歇气化炉面临淘汰,无烟煤市场萎缩的情况,提出以晋城无烟煤为原料,利用赛鼎碎煤加压气化技术,生产适合建材行业大规模使用的工业燃气。以无烟煤为原料的河北沙河年产26亿m^3工业清洁燃气项目为基础,对无烟煤与天然气价格、项目经济性的关系进行了分析,结果表明,以晋城无烟块煤运到河北沙河的到厂价935元/t计算,盈亏平衡天然气价约2.26元/m^3;以沙河工业天然气到户售价2.5元/m^3计算,盈亏平衡到厂煤价约1 077元/t,项目经济性较好。     

超临界二氧化碳干气密封相态分布规律与密封性能研究

以超临界二氧化碳干气密封为研究对象，分别以维里方程、Lucas方程描述二氧化碳真实气体效应、黏度的变化，在考虑阻塞流效应的同时，采用有限差分法对考虑离心惯性力效应的Reynolds方程与能量控制方程进行耦合求解，分析讨论了工况参数与槽形结构参数对其相态分布规律与密封性能的影响。研究表明：S-CO₂从密封端面进口至出口的流动过程中，如果工况参数设置合理，将由超临界态逐渐转变为气态，并不会出现液态；较低的进口压力、进口温度以及转速，均会容易导致潜在的凝结流动发生；相比于工况参数对相态分布的影响，槽形参数对相态分布的影响较小，近乎可以忽略；开启力除了随进口温度的升高而减小外，均随进口压力、转速、槽深、螺旋角的增大而增大；泄漏率随进口温度和转速的增大而减小，但其随进口压力、槽深、螺旋角的增大而增大。这些结果为进一步研究超临界二氧化碳干气密封提供了一定的支撑。     

Cu/Fe3O4 catalyst for water gas shift reaction: Insight into the effect of Fe2+ and Fe3+ distribution in Fe3O4

Two precursors, namely, p-CFO-T (tetragonal) and p-CFO-C (cubic), were fabricated by a sol-gel method via citric acid and poly(vinyl alcohol) complexation, respectively. After H₂-reduction, the two were converted to Cu/Fe₃O₄ catalysts of different complexions, which are named as CFO-CA and CFO-PVA, respectively. The distribution of Fe²⁺ and Fe³⁺ in the Cu/Fe₃O₄ catalysts was studied by Raman and XPS techniques. It was disclosed that the distribution of Fe²⁺ and Fe³⁺ in Fe₃O₄ has an effect on Cu–Fe₃O₄ interaction and catalyst surface basicity. Compared to CFO-PVA, CFO-CA has a larger amount of Fe³⁺, which mostly sits at the octahedral sites, leading to stronger Cu–Fe₃O₄ interaction, and a larger amount of catalyst surface sites that are of weak basicity. As a result, the critical elementary steps of WGS reaction, viz. water dissociation, –COOH decomposition and CO₂ desorption are promoted as reflected in the lower E_a and higher catalytic activity of CFO-CA.     

混炼方式对螺旋纳米碳纤维增强天然橡胶复合材料力学性能的影响

采用干法和湿法两种混炼工艺制备了螺旋纳米碳纤维(HCNFs)/炭黑(CB)/天然橡胶(NR)复合材料,通过扫描电镜、拉伸试验机和应变扫描仪分别对所制备复合材料的界面形貌、力学性能和Payne效应进行了测试分析,考察了混炼方式对复合材料宏观力学性能及Payne效应的影响。结果表明,与纯CB填料相比,在干湿两种混炼方式下,添加适量的HCNFs(1～6份)能提高HCNFs/CB/NR复合材料的300%定伸应力、扯断伸长率、拉伸强度和硬度。与干法混炼相比,湿法混炼能明显增强HCNFs/CB/NR复合材料的Payne效应,并提升在HCNFs高添加量(2～6份)条件下的拉伸强度和扯断伸长率,这主要源于湿法混炼能够有效改善HCNFs在橡胶基质中的分散性。     

Development of mobile miniature natural gas liquefiers

With increasing consumption of natural gas (NG), small NG reservoirs, such as coalbed methane and oil field associated gas, have recently drawn significant attention. Owing to their special characteristics (e.g., scattered distribution and small output), small-scale NG liquefiers are highly required. Similarly, the mixed refrigerant cycle (MRC) is suitable for small-scale liquefaction systems due to its moderate complexity and power consumption. In consideration of the above, this paper reviews the development of mobile miniature NG liquefiers in Technical Institute of Physics and Chemistry (TIPC), China. To effectively liquefy the scattered NG and overcome the drawbacks of existing technologies, three main improvements, i.e., low-pressure MRC process driven by oil-lubricated screw compressor, compact cold box with the new designed heat exchangers, and standardized equipment manufacturing and integrated process technology have been made. The development pattern of “rapid cluster application and flexible liquefaction center” has been eventually proposed. The small-scale NG liquefier developed by TIPC has reached a minimum liquefaction power consumption of about 0.35 kW·h/Nm³. It is suitable to exploit small remote gas reserves which can also be used in boil-off gas reliquefaction and distributed peak-shaving of pipe networks.     

Effects of phenylenediamines and alkoxysilanes on gas transport properties of polyimide - silica hybrid membranes

Gas transport properties of polyimides (PIs) and their silica hybrids were investigated. The PIs synthesized with several methyl-substituted phenylenediamines were hybridized with silica via a sol–gel process with different alkoxysilanes. The prepared hybrid membranes showed controlled gas permselectivity, depending on the selected phenylenediamines and alkoxysilanes. It was worth noting that the hybrids prepared with tetraethoxysilane possessed improved CO₂ permselectivity with increasing silica content, which tended to exceed the upper-bound trade-off line. This fact suggested the additional formation of free volume holes especially favorable for the CO₂/CH₄ separation around the polymer/silica interfacial area.     

Zeolite imidazolate framework (ZIF)-based mixed matrix membranes for CO2 separation: A review

Mixed matrix membranes (MMMs), which combine the good separation performance of inorganic materials with the low cost of polymers, have emerged as a research hotspot for gas separation membranes. Zeolite imidazolate frameworks (ZIFs) are widely used as fillers to prepare MMMs owing to their advantageous characteristics, such as adjustable pore channels, unsaturated sites, and easy functionalization. For MMMs, three directions can be employed as criteria for improvement compared with pristine polymeric membranes. In this article, the progress of ZIF-based MMMs is reviewed from the aspects of sole-ZIF-based MMMs and modified ZIF-based MMMs. Both strategies improve the separation performance through different improvement directions and mechanisms. Our analysis shows that the synergistic effect of the modified filler can change the structure of the membranes, such as by improving the filler–polymer interface voids, which provides a foundation to overcome the trade-off effect to a certain extent. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48968.     

Ni、Zn改性Cu/水泥催化剂及其甲醇高温裂解性能

以碱式碳酸镍、碱式碳酸锌、碱式碳酸铜和水泥为原料制备水泥负载的Cu-Ni，Cu-Zn，Cu-Ni-Zn催化剂，考察了合成催化剂的甲醇裂解反应性能。结果表明：在常压、质量空速为3.39 h-1、温度为380~420 ℃的条件下，Cu-Ni/水泥催化剂作用下的甲醇转化率均在96%以上；Cu-Zn/水泥催化剂作用下的甲醇转化率较低，但对H2和CO选择性较高；Cu-Ni-Zn/水泥催化剂经1 600 h运转，甲醇转化率和产物分布变化不大，甲醇转化率基本维持在81%以上，(H2+CO)摩尔分数大于98%，说明Cu-Ni-Zn/水泥催化剂具有良好的高温稳定性。